MATLAB Simulink

Hybrid AC/DC Microgrid with PV, BESS and Diesel

Coordinated energy-management simulation for a hybrid AC/DC microgrid containing solar PV, battery storage and diesel generation.

Deployment note: upload the matching MP4 file to /assets/videos/hybrid-ac-dc-microgrid-pv-bess-diesel.mp4 and keep this URL stable after indexing.

Project overview

Coordinated energy-management simulation for a hybrid AC/DC microgrid containing solar PV, battery storage and diesel generation. This dedicated watch page keeps the video, software context, model architecture and technical outputs together at one stable crawlable URL.

Engineering objectives

The simulation can reproduce a published methodology, validate a proposed design change, compare alternative controls or operating cases, or support a parametric optimization. The required metrics and acceptance criteria should be defined before solver execution.

Model architecture

  • AC and DC subgrids
  • PV generation
  • Battery energy storage
  • Diesel generator
  • Interlinking converter and EMS

Results available for analysis

Power sharing
AC/DC bus voltage
Battery SOC
Diesel dispatch
Load-step response

Research adaptation

Geometry, material properties, loads, disturbances, control strategies and comparison cases can be adjusted for an undergraduate project, master’s dissertation, PhD methodology chapter or journal-paper extension. Results should state units, operating conditions and limitations.

Typical deliverables

  • Editable simulation model and configuration files
  • Geometry, material and parameter documentation
  • Boundary-condition and experiment matrix
  • Publication-ready plots, contours and comparison tables
  • Methodology and results-discussion support

Frequently asked questions

Which software is used for this project?

The reference implementation is prepared in MATLAB Simulink. The exact version, solver modules and license requirements should be confirmed before development.

What deliverables can be prepared?

Typical deliverables include the editable model, parameter and boundary-condition sheet, result plots, comparison tables, technical explanation and documentation support.

Can the model be adapted to a research paper?

Yes. Geometry, materials, operating cases, validation references, optimization variables and performance metrics can be adapted to a proposal or published paper.

Is thesis and revision support available?

Methodology documentation, results discussion, figure preparation and supervisor-revision support can be included within an agreed research-support scope.

WA